Mold engraving and milling machine guideway maintenance and maintenance

No matter which kind of CNC lathe must carry out on-time maintenance, for mold engraving and milling machine, because the guide rail daily in high load, long time load back and forth running mode, so as the key maintenance target of CNC lathe. In fact, this is the same basic principle of maintenance and cars, key parts to special policies. Then the next side by the technical engineer to say to you guide rail maintenance operation steps.

Guide rail maintenance:

First, protective measures to get it right: mold carving and milling machine in the application of the whole process should need to pay attention to avoid cutting, cutting oil, etc. splashed on the surface of the guide rail. As the debris will cause rapid damage to the guideway, and cutting oil has corrosion, will cause the guideway rust. These two kinds of damage will lead to the processing accuracy of CNC lathe is more serious damage. Naturally, today's mold engraving and milling machine has been improved, especially the new generation of 650 mold engraving and milling machine, according to the new upgraded design scheme, can completely avoid these two conditions.

Second, enhance the guide rail lubrication: for the drag rail, the choice of lubricant lubrication; and flip rail, the lubricant or [industrial production electrical network - cnelc] the grease can be. Guide rail oil lubrication is generally used automatic lubrication, we should pay attention to the application of the actual operation of the automatic lubrication system software to check the separation valve, if it produces a common failure will lead to the guide rail can not be fully automatic lubrication.

Third, every day check: be sure to check the daily oil pump within the hydraulic oil aspect ratio, if the remaining oil is insufficient, should be immediately added to the lubricant; in addition to pay attention to check whether the lubricant pump can be timed to perform the start and termination, and to pay attention to check the timed implementation of the start is not to show lubricant.

Fourth, private aircraft special type: production and processing of high-purity graphite and porcelain and other materials, please be sure to use high-purity graphite engraving and milling machine. Because of this raw material in the production and processing, very easy to cause smoke damage to each component of the CNC lathe. High-purity graphite engraving and milling machine are selected two-layer safety protection management system, and with each other we have our invention of the wet curtain, stronger protection.