1. CNC engraving and milling machine company operator should be familiar with, master gantry machining center machine performance and characteristics. Ensure that the emergency stop switch in the event of an emergency, can quickly and effectively play a role in avoiding injuries.

2. Wear good labor protection equipment according to the regulations, it is strictly prohibited to wear gloves to operate.

3. When the equipment is working, do not touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts with your hands.

4. Do not place tools or non-processing workpieces on the gantry machining center or moving objects.

5. The computer desk or work table next to the machine must be sturdy and must not be placed on moving parts.

6. When loading and unloading the workpiece, the machine should be stopped first, and pay attention to keep a proper distance between the workpiece and the tool. Please do not open the front door and the left and right covers arbitrarily during the operation of the machine to avoid injury.

7. After the tool has been set, please run a test run with DRY RUN to make sure the program is correct.

8. When shutting down the machine after a power failure or emergency stop, the three axes should be restored to their original mechanical position.

9. Do not remove the travel switch or any related parts of the protection switch without authorization.

10. Before leaving the machine at the end of the work, you should turn off the control power switch of the operating panel, the main switch of the electrical box.