Vertical machining centers of high technical content, so the operating procedures are messy, it is necessary to operate in strict accordance with the operating procedures to ensure the normal operation of vertical machining centers. In order to ensure the normal operation of vertical machining centers, in the use of vertical machining centers, we should pay attention to what it.　

1, after powering on, check the switch, buttons and keys are normal, sensitive, assuming that the vertical machining center is not normal.

2, do not wear gloves to touch the rotating mechanical parts. Do not wear gloves to operate the switches and buttons on the panel. You can not touch the switches and buttons on the operating panel with wet hands.

3、Check that the voltage, oil pressure and air pressure are normal. Manual lubrication requires manual lubrication.

4, Perform daily protection every day. Check the transmission log before operation. Before starting the vertical machining center, check whether the regulated power supply is in the condition of automatic voltage scheduling.

5, when clamping the workpiece, pay attention to the workpiece to pay attention to the direction of the pressure plate pin whether to prevent the movement of things, check the white part and the size of the anomaly (assuming high points). When using the press to process the workpiece, please pay attention to whether the thing will be milling jaws and so on.

6、Correctly measure and account for the coordinate system of the part, and verify and validate the effect.

7、It is necessary to verify whether the stuff in the program is consistent with the stuff in the processing table to avoid wrong stuff. Check the shape of the shape and the front and back of the scale of each axis to meet the requirements of the machining process, and assuming that you can hit the workpiece and fixture.

8, inspection and single-stage inspection cut, fast override switch is necessary to be placed in a lower gear.